Sharp DV-NC55U

27
The following preparations are necessary for watching the VCR or DVD.
Make sure that the Unit and the TV are connected as shown below.
The following pages describe how to operate this Unit.
Preparations Before Using the Unit
PLAYREW PLAY STOP
VCR / DVD COMBINATION
OPEN/
CLOSE
VCR DVD
(AV 1 )
EJECT/STOPPOWER
STANDBY
CH(TRACKING)
L(MONO)-AUDIO-RAV 2 IN VDEO
POWER
The Unit
TV
1 Connect the TV to DVD/VCR shared output jacks.
2 Connect to the TV to DVD output jacks.
3 Connect the TV to ANTENNA OUT
Watching VCR
When
11
11
1,
2 2
2 2
2 and
33
33
3 or when
11
11
1 and
33
33
3
are connected
TV
Turn on the TV and switch the TV channel to the external “VIDEO” or
“AV” channel which is connected to the DVD /VCR shared output
jacks.
This Unit
1 Press POWER.
2 Move VCR/DVD CHANGE Switch on the remote control to
VCR.
Setup Complete
Now you are ready to watch the VCR.
When only
33
33
3 is connected
TV
Turn on the TV and switch the TV to either channel 3 or 4 (the
channel used for VCR).
This Unit
1 Press POWER.
2 Move VCR/DVD CHANGE Switch on the remote control to
VCR.
3 Press TV/VCR on the remote control to display “VCR” on the
VCR Front Panel Display.
Setup Complete
Now you are ready to watch the VCR.
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV/VCR EJECT
FUNCTION
CONTROL
PROGRAM ZOOM
CANCEL
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVDAM/PM INPUT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
VCR/DVD
CHANGE
Switch
POWER
TV/VCR