Sharp DV-NC55U

28
Preparations Before Using the Unit
Watching DVD
When
11
11
1,
22
22
2 and
33
33
3 are connected
TV
Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel, which is connected to DVD output jack.
This Unit
1 Press POWER.
2 Move VCR/DVD CHANGE Switch on the remote control to
DVD.
Setup complete
Now you are ready to watch the DVD.
When
11
11
1 and
33
33
3 are connected
TV
Turn on the TV and switch the TV channel to the external “VIDEO” or
“AV” channel which is connected to the DVD /VCR shared output
jack.
This Unit
1 Press POWER.
2 Move VCR/DVD CHANGE Switch on the remote control to
DVD.
3 Press VCR/DVD SELECTOR on the remote control to enter the
DVD mode.
• The DVD Output indicator at the front of Unit lights up.
Setup complete
Now you are ready to watch the DVD.
• You cannot watch DVD if only 3 is connected.
100
OPEN/
CLOSE
POWER
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
TV/VCR EJECT
FUNCTION
CONTROL
PROGRAM ZOOM
CANCEL
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
REPLAY
VCR DVDAM/PM INPUT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
VCR/DVD
CHANGE
Switch
POWER
VCR/DVD
SELECTOR
PLAYREW PLAY STOP
VCR / DVD COMBINATION
OPEN/
CLOSE
VCR DVD
(AV 1 )
EJECT/STOPPOWER
STANDBY
CH(TRACKING)
L(MONO)-AUDIO-RAV 2 IN VDEO
DVD Output
indicator
POWER
The Unit
TV
1 Connect the TV to DVD/VCR shared output jacks.
2 Connect to the TV to DVD output jacks.
3 Connect the TV to ANTENA OUT