37
OSD Language Setting
Preparation
• See Watching VCR on page 27.
1 Press VCR MENU to display menu screen.
Caution:
When you use the Unit for the first time or the power is interrupted
for more than 60 seconds (power failure, etc.), press VCR MENU.
“LANGUAGE” screen in the step 3 appears. You should set the
language to be used in the OSD.
2 Select “LANGUAGE” with ' / " and then press SET.
SET UP
MENU
ENTER :SET EXIT :MENU
CHANNEL PRESET
SELECT :
CLOCK
LANGUAGE
TIMER
3 Select the language you want to use with ' / ".
(Example) ENGLISH
ESPANOL
LANGUAGE
ENTER :SET EXIT :MENU
FRANÇAIS
SELECT :
ENGLISH
4 Press SET to enter.
• The screen returns to normal.
• If you press VCR MENU to exit the LANGUAGE screen in Step 3, the
data will not be stored.
To Next Page
Loading...
