SICK GM32 Series User Manual

CONTENTS
4
8012707/ZVF9/V2-1/2019-04 | SICKOPERATING INSTRUCTIONS | GM32
Subject to change without notice
4.4 Transport safety devices .............................................................................. 29
4.5 Installing the device flange on the purge air fixture ................................... 30
4.6 Aligning the measuring probe in flow direction........................................... 31
4.6.1 When the probe alignment has to be set.................................... 31
4.7 For the GPP probe: Electrical connection .................................................... 32
4.8 Electrical connection of the SR-unit............................................................. 33
4.9 Switching on the power supply of the GM32............................................... 33
4.10 For GMP probe: Start-up of the purge air supply......................................... 33
4.11 Installing the measuring probe in the gas duct........................................... 34
4.12 Installing the SR-unit on the device flange.................................................. 36
4.13 Optical fine alignment of the SR-unit........................................................... 36
4.14 OPC ................................................................................. 37
4.14.1 OPC interface................................................................................ 38
4.15 Installing weatherproof covers (option) ....................................................... 39
5 Operation ..................................................................................................41
5.1 Recognizing an unsafe operating state ....................................................... 41
5.2 Operator panel.............................................................................................. 42
5.2.1 Status indicators (LEDs) .............................................................. 42
5.2.2 Button assignment ....................................................................... 42
5.2.3 Contrast setting............................................................................ 42
5.2.4 Language ...................................................................................... 43
5.2.5 Menu tree ..................................................................................... 43
5.2.5.1 Diagnosis .................................................................. 44
5.2.5.2 Check cycle ............................................................... 45
5.2.5.3 Alignment check (automatic optical alignment
check; option) ........................................................... 45
5.2.5.4 Adjustments.............................................................. 45
5.2.5.5 Maintenance ............................................................. 47
6 Maintenance............................................................................................. 48
6.1 Maintenance plan (operator) ....................................................................... 48
6.1.1 Recommended expendable and wearing parts for 2 years
operation ...................................................................................... 48
6.2 Preparation work .......................................................................................... 48
6.3 Swiveling out and removing the SR-unit...................................................... 49
6.4 Visual inspection........................................................................................... 49
6.5 Cleaning the window .................................................................................... 50
6.6 Checking and replacing the desiccant cartridges ....................................... 50
6.7 Replacing the sender lamp and LED for GM32 LowNOx ............................ 51
6.7.1 Tools required............................................................................... 51
6.7.2 Sender lamp with LED unit .......................................................... 51
6.8 Cleaning the purge air unit........................................................................... 53
7 Clearing malfunctions............................................................................. 54
7.1 Safety instructions when clearing malfunctions ......................................... 54

SICK GM32 Series Specifications

General

Brand	SICK
Model	GM32 Series
Category	Measuring Instruments
Language	English