SICK GM32 Series

64
8012707/ZVF9/V2-1/2019-04 | SICKOPERATING INSTRUCTIONS | GM32
Subject to change without notice
9 SPECIFICATIONS
9 Specifications
9.1 Conformities
The technical design of this instrument complies with the following EC
directives and EN standards:
● EC Directive LVD 2006/95/EC
● EC Directive EMC 2004/108/EC
Applied EN standards:
● EN 61010-1, Safety requirements for electrical equipment for measurement, control
and laboratory use
● EN 61326, Electrical equipment for measurement technology, control technology and
laboratory use - EMC requirements
● EN 14181, Calibration of continuously operating emission measuring devices
● EN 15267-3: Certification of automated measuring systems - Part 3
● EN 60068: Shock and vibration
9.1.1 Electrical protection
● Insulation: Class of protection 1 in accordance with EN 61140.
● Insulation coordination: Overvoltage category II in accordance with EN61010-1
● Contamination: The control unit operates safely in an environment up to contamination
level 2 in accordance with EN 61010-1 (usual, non-conductive contamination and
temporary conductivity by occasional moisture condensation)