User Instructions
Programming Procedures
IDM corded
8015906/2013-07-02 © SICK AG · Germany · All rights reserved · Subject to change without notice
11
2.2.4 Multiple Scan Selection
Scan one of family
codes
Scan
„PROGRAM“
Scan one or several
option codes
Repeat
selection
Scan
„END“
Yes
No
Enter Programming mode.
Select the desired programming
family.
Select one or several option codes for
the desired parameters.
If it‘s necessary scan „FIN“ to
terminate the option code selection.
Do you want to select another
programming family?
Exit programming mode.
To Next Page
Loading...
