To Next Page

To Previous Page

Symbology Reading Control

User Instructions

IDM corded

2.4.12 Code 11 & Code 93 Settings

PROGRAM F_DEFAULT

Family Code Selection P.C. Parameter Selection Option Code

Code 11 Settings

SS Disable Code 11  0

SS Enable Code 11 1

SS Disable check digit verification  2

SS Select 1-check digit verification 3

SS Select 2-check digit verification 4

SS Disable check digit transmission  5

SS Enable check digit transmission 6

SS Default (04)  FIN

MS 01-Maximum (2 digits)

Code 11 Min. Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

SS Default (98)  FIN

MS 98-Minimum (2 digits)

Code 11 Max. Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

Code 39 Settings

SS Disable Code 93 0

SS Enable Code 93  1

SS Disable check digit transmission  2

SS Enable check digit transmission 3

SS Default (01)  FIN

MS 01-Maximum (2 digits)

Code 39 Min. Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

SS Default (98)  FIN

MS 98-Minimum (2 digits)

Code 39 Max. Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

SICK IDM series User Instructions

Other manuals for SICK IDM series