Name: SICK IDM series
Brand: SICK
Rating: 4 (1 reviews)

To Next Page

To Previous Page

User Instructions

Symbology Reading Control

IDM corded

2.4.11 Code 25 Family Settings

PROGRAM F_DEFAULT

Family Code Selection P.C. Parameter Selection Option Code

Code 25 Settings

SS Disable Standard/Industrial 2 of 5  0

SS Enable Standard/Industrial 2 of 5 1

SS Disable Matrix 2 of 5  2

SS Enable Matrix 2 of 5 3

SS Disable China Postal Code  4

SS Enable China Postal Code 5

SS Disable check digit verification  6

SS Enable check digit verification 7

SS Disable check digit transmission  8

SS Enable check digit transmission 9

SS Default (04)  FIN

MS 01-Maximum (2 digits)

Code 25 Family Min.

Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

SS Default (98)  FIN

MS 98-Minimum (2 digits)

Code 25 Family Max.

Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

For Code25 setting, we recommend you to select only one type of Code 25 or set the

maximum/minimum bar code length. To decode all types of Code 25 or to variable length of Code 25

will increase the possibility of reading error.

SICK IDM series User Instructions

Other manuals for SICK IDM series