User Instructions
Symbology Reading Control
IDM corded
8015906/2013-07-02 © SICK AG · Germany · All rights reserved · Subject to change without notice
39
2.4.21 QR Code Settings
PROGRAM F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
QR Code Settings
SS Disable QR Code 0
SS Enable QR Code 1
SS Disable MicroQR Code 2
SS Enable MicroQR Code 3
SS Disable QR Code Append 4
SS Enable QR Code Append 5
SS Disable QR Code Inverse Reading 6
SS Enable QR Code Inverse Reading 7
SS Auto detect QR Code Inverse Reading 8
SS Default (01) FIN
MS 01-Maximum (4 digits)
QR Code Min. Length
Scan 4 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
SS Default (7089) FIN
MS 7089-Minimum (4 digits)
QR Code Max. Length
Scan 4 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
To Next Page
Loading...
Need help?
General
