Operation Control (all IDM series)
User Instructions
IDM corded
68
© SICK AG · Germany · All rights reserved · Subject to change without notice 8015906/2013-07-02
2.10.5 Presentation Auto-Sense , Sensitivity
PROGRAM F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
SS Disable 0
Presentation Auto-sense
SS Enable
1
SS Level 1 0
SS Level 2 1
SS Level 3 2
SS Level 4 3
SS Level 5 4
SS Level 6 5
Presentation Sensitivity
SS Level 7 6
Presentation Auto sense
When enabling the Presentation Auto-sense, the scanner can switch automatically from hand-held to hands-
free scanning when working with the Hands-free stand.
Presentation Sensitivity
The presentation sensitivity is used to configure the sensitivity level when the scanner is set as presentation
mode. The higher lever means higher sensitivity for detecting the barcode.
To Next Page
Loading...
