To Next Page

To Previous Page

Symbology Reading Control

User Instructions

IDM corded

2.4.14 Code 128 Settings

PROGRAM F_DEFAULT

Family Code Selection P.C. Parameter Selection Option Code

Code 128 Settings

SS Disable Code 128 0

SS Enable Code 128  1

SS ISBT Concatenation Off  2

ISBT Concatenation On 3

SS Default (01)  FIN

MS 01-Maximum (2 digits)

Code 128 Min. Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

SS Default (98)  FIN

MS 98-Minimum (2 digits)

Code 128 Max. Length

Scan 2 digits from the option code chart in the Appendix;

then the scanner will terminate this selection automatically.

Code 128 Security Level

SS Level 0 0

SS Level 1  1

Code 128 Security Level

The scanner offers two levels of decode security for Code128 bar codes:

 Level 0: If you are experiencing misread of poor-printed or out-of-spec. bar codes in level 1, please

select level 0.

 Level 1: This is the default setting which allows the scanner to operate fastest, while providing

sufficient security in decoding "in-spec." Code 128 bar codes.

SICK IDM series User Instructions

Other manuals for SICK IDM series