SICK IDM series User Instructions

Programming Procedures
User Instructions
IDM corded
12
© SICK AG · Germany · All rights reserved · Subject to change without notice 8015906/2013-07-02
2.2.5 Cycling Scan Selection
Scan one of family
codes
Scan
„PROGRAM“
Scan one or several
option codes
Repeat
selection
Scan
„END“
Yes
No
Enter Programming mode.
Select the desired programming
family.
Select one or several option codes for
the desired parameters as “Single” or
“Multiple” scan selection.
Do you want to select another
programming family?
Exit programming mode.
Scan “FIN”
Finish cycling selection. (If necessary)

SICK IDM series Specifications

General

Brand	SICK
Model	IDM series
Category	Barcode Reader
Language	English