SICK S100 Standard User Manual

Operating instructions Chapter 2
S100
8012238/YY30/2015-02-20 © SICK AG • Subject to change without notice 7
About this document
2 About this document
Please read this chapter carefully before working with this documentation and the S100.
2.1 Function of this document
These operating instructions are designed to address the technical personnel of the
machine manufacturer or the machine operator in regards to correct mounting, electrical
installation, commissioning, operation and maintenance of the S100 laser scanner.
These operating instructions do not provide instructions for operating the machine, the
system or the vehicle on which the laser scanner is, or will be, integrated. Information on
this is to be found in the appropriate operating instructions for the machine, the system or
the vehicle.
2.2 Target group
These operating instructions are aimed at the planning engineers, machine designers and
operators plants and systems on which one or more S100 laser scanners are to be
operated. They also address people who integrate the S100 into a machine, a system or a
vehicle, initialise its use, or who are in charge of servicing and maintaining the device.
2.3 Scope
These operating instructions are only applicable to the S100 laser scanner with the
following entry on the type label in the field Operating Instructions: 8012236
This document is part of SICK part number 8012236 (operating instructions “S100 Laser
Scanner” in all available languages).
For the configuration and diagnostics of these devices you require CDS-S100 version 1.00
or higher. To determine the version of your software version, select the Module-Info...
option in the ? menu.
2.4 Depth of information
These operating instructions contain information on the S100 laser scanner. They have
the following parts:
 mounting
 electrical installation
 commissioning and configuration
 care and maintenance
 fault diagnosis and troubleshooting
 part numbers
 accessories
 conformity and approval
Planning and using laser scanners such as the S100 also require specific technical skills
which are not detailed in this documentation.
When operating the S100, the national, local and statutory rules and regulations must be
observed.
We also refer you to the SICK AG homepage on the Internet at
www.sick.com
Here you will find information on:
 application examples
 these operating instructions in different languages for viewing and printing
Note

SICK S100 Standard Specifications

General

Brand	SICK
Model	S100 Standard
Category	Measuring Instruments
Language	English