EasyManuals Logo

SICK S100 Standard User Manual

SICK S100 Standard
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Operating instructions Chapter 3
S100
8012238/YY30/2015-02-20 © SICK AG • Subject to change without notice 9
On safety
3 On safety
This chapter deals with your own safety and the safety of the equipment operators.
Please read this chapter carefully before working with the S100.
3.1 Correct use
The S100 laser scanner must be used only as defined in section 3.3 Applications of the
device” on page 9. It must be used only by qualified personnel on the machine where it
has been installed and initialised by authorised personnel in accordance with these
operating instructions.
Observe the requirements according to chapter 1 „Important safety notes“.
If the device is used for any other purposes or modified in any way also during mounting
and installation any warranty claim against SICK AG shall become void.
3.2 Authorised personnel
The S100 must only be installed, commissioned and serviced by adequately qualified
personnel. The following qualifications are necessary for the various tasks:
3.2.1 Mounting and maintenance
basic technical training
knowledge of the current safety regulations in the workplace
3.2.2 Electrical installation and replacement
practical electrical training
knowledge of current electrical safety regulations
knowledge on the use and operation of devices in the related application
3.2.3 Commissioning, operation and configuration
knowledge on the use and operation of devices in the related application
knowledge on the software and hardware environment in the related application
basic knowledge of the Windows operating system used
3.3 Applications of the device
The S100 laser scanner is used for protecting plant. It is intended to be used indoors. The
S100 is not intended to be used outdoors.
The S100 is not a safety laser scanner and is therefore not allowed to be used for tasks
related to the protection of people!
The S100 complies with the requirements in the standard on the radiated emissions as
defined for class A (industrial application); the S100 is therefore only suitable for use in an
industrial environment.
Note
Note

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SICK S100 Standard and is the answer not in the manual?

SICK S100 Standard Specifications

General IconGeneral
BrandSICK
ModelS100 Standard
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals