COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
Displaying the vehicle class on the basis of the output category system
1. Show the Category External column using the tool icon.
In the Category External area, the vehicle class is determined and reported on the
basis of the selected output category system. In this case, reference is no longer made
to all the vehicle classes within the selected category system because the configured
classification groups are used instead (see also chapter 3.4.2 Operating principle of
the vehicle classification).
2. Click inside the “Category External” field to open the Additional Values window. This
enables you to see the confidence level with which the vehicle has been assigned to
the output category in question.
By grouping the vehicle classes together in this way, a higher confidence level can be
achieved than when the vehicle is assigned on the basis of all the classes within the set
category system.
Note
To Next Page
Loading...