The protection functions can switch off 1-pole. The close command is always 3-pole. Optionally, only the open
poles are closed.
[dw1polls-020211-01.tif, 1, en_US]
Figure 8-14 Circuit Breaker with 1-Pole Triggering
For the circuit breaker with 1-pole triggering, triggering takes place via one relay per phase for the trip
command and via a 4th relay for the close command (see next figure).
[dw1panls-020211-01.tif, 1, en_US]
Figure 8-15 1-Pole Connection of a Circuit Breaker
Control Functions
8.2 Switching Devices
1088 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
