Siemens 7SJ82 - Application and Setting Notes

[sctimedg-220415, 1, en_US]
Figure 3-71 Time Information in DIGSI
For every time source, you see the following:
•
Last received time (with date)
•
Receipt time of the last received time telegram
•
Configured type of timer
•
Indication of timer outage or failure
•
Whether the device time is currently synchronized from the time source
The lower section displays the device time, which is continuously updated. If the internal device time and the
infeed time source were synchronous at the time of telegram receipt, both displayed times are identical.
i
i
NOTE
All times displayed (also the time source) take into consideration the local time settings (zone and daylight
saving time of the device) in the form of a numerical offset for UTC (universal time).
Application and Setting Notes
Parameter: Date Format
•
Default setting Date format = YYYY-MM-DD
With the Date format parameter, you define the local customary format of the date display.
Parameter Value
Description
YYYY-MM-DD
Day.Month.Year: Typical European display
Example: 24.12.2010
YYYY-MM-DD
Month/Day/Year: Typical US representation
Example: 12/24/2010
YYYY-MM-DD
Year-Month-Day: Typical Chinese display
Example: 2010-12-24
Parameter: Time zone time source 1,Time zone time source 2
•
Default setting Time zone time source 1 = local, Time zone time source 2 = local
With the Time zone time source 1 and Time zone time source 2 parameters, you define the
handling of time zones of the external timer.
3.6.4
System Functions
3.6 Date and Time Synchronization
SIPROTEC 5, Overcurrent Protection, Manual 149
C53000-G5040-C017-8, Edition 07.2017