[scautcp2-220114-01-DE, 1, en_US]
Figure 5-49 Activation of the protocol
This protocol is also available for Port J of the integrated Ethernet interface of the base module (refer to
following figure).
[scautcp3-220114-01-DE, 1, en_US]
Figure 5-50 Selection of the Protocol
With the selection of the SUP protocol for the 20-mA unit, DIGSI automatically adds the Analog units function
group and the 20-mA unit Ether. function to your device configuration (refer to the following figure).
Function-Group Types
5.6 Function-Group Type Analog Units
SIPROTEC 5, Overcurrent Protection, Manual 253
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
