Resets 9410 series
4. Select the desired tab in the Normal Mode dialog box. Depending on the tab
selected, different resets are available.
Tab Reset available
Energy Master Reset
Rolling Demand Peak Reset
Master Reset
Volts, Amps and Power Master Reset
Conditional Energy Cnd Reset
Master Reset
Input Metering IM(n) Reset
NOTE: n is the input metering number, for example IM1.
Peak Reset
Master Reset
5. Click the appropriate button to perform the reset.
For some resets, the meter indicates that the reset is in progress. Do not configure
or power down your meter until it indicates that the reset is complete or some
parameters may not be completely reset.
Related Topics
• Revenue locking
7EN05-0336-03 167
To Next Page
Loading...
