Siemens Cerberus CS1140 - Safety Regulations; Signal Words and Symbols

e1249d1
9
Fire & Security Products
Siemens Building Technologies Group
01.1999
3.4.6 I-Bus/LON module E3I040
Pos. Component Preparation Default
1 DIL switch S3
I-Bus address
Set according to system documentation address 0
2 Resistor R60
LON-Bus termination (EOL)
If LON-Bus is not set up as a stub line, R60
must be changed to 50W
 See also hardware description
(document e1260)
100W
1
2