e1249d2
33
Fire & Security Products
Siemens Building Technologies Group
01.1999
Deactivate address allocation ( page 93)
The data which are now localized in the control unit can be loaded with the function
Comm Fast Upload Loc. –> PC in the SWE11 ( Page 94)
Load localization data from DZ1154 into AlgoWorks
1. Start up AlgoWorks shell
2. Connect DZ1154 to the maintenance PC
3. Localization data DZ1154 AlgoWorks
AlgoWorks: Function CS11-Tools Read AlgoMan data
AlgoMan: Mem send [2]
Localization structure
All devices localized using the AlgoMan and identified by the control unit are allocated a
localization index greater than 10,000 in the localization structure. In this way the devices
localized using the AlgoMan can be distinguished from those localized using address al-
location.
First device localized using AlgoMan = Localization index 10,001
Second device localized using AlgoMan = Localization index 10,’002
etc.
Example: Localization structure using AlgoMan
Allocating devices ( page 38)
Using Auto Link:
The devices localized using the AlgoMan can be linked with the function Auto Link. This
requires manual adjustment of the localization index counters.
Procedure:
1. Open station nodes of the physical structure with the raw node editor and the value of
the parameter next loc. index set to 10001 (field must be unlocked): Node Unlock
or <Alt> + <K>).
2. Set localization indexes in the logical structure according to commissioning list or
ground plan Loc. Set loc. Index or
3. Open station nodes in the physical structure, read off the value of the parameter next
loc. index and use the raw node editor to insert it in the field next loc. index of the
station node in the localization structure (field must be unlocked: Node Unlock or
<Alt> + <K>).
4. Start automatic linking Loc. Auto Link
To Next Page
Loading...
