Siemens Cerberus CS1140 Commissioning

e1249d4
93
Fire & Security Products
Siemens Building Technologies Group
01.1999
Deactivating line-by-line device localization:
After localization has been completed, localization mode can be deactivated via the ter-
minal as follows:
1. Select Isolation message for the corresponding function unit (line)
2. Press F1 key
3. Enter password requested
4. Select menu point ’End address allocation’ , press ok

The line switches back to normal operation and the ISOLATION message disap-
pears.

Siemens Cerberus CS1140 Specifications

General

Brand	Siemens
Model	Cerberus CS1140
Category	Security Sensors
Language	English