Siemens CPU 410-5H Process Automation User Manual

Link-up and update
8.4 Special features in link-up and update operations
CPU 410-5H Process Automation/CPU 410 SMART
122 System Manual, 10/2013, A5E32631667-AA
Memory reset request on cancelation of link-up
If the link-up operation is canceled while the content of load memory is being copied from the
master to the standby CPU, the standby CPU requests a memory reset. This indicated in the
diagnostics buffer by event ID W#16#6523.

Siemens CPU 410-5H Process Automation Specifications

General

Brand	Siemens
Model	CPU 410-5H Process Automation
Category	Controller
Language	English