CPU 410-5H Process Automation/CPU 410 SMART
System Manual, 10/2013, A5E32631667-AA
15
Preface
Purpose of this manual
This manual represents a useful reference and contains information on operations,
descriptions of functions, and technical specifications of the CPU 410-5H Process
Automation and the CPU 410 SMART.
For information on installing and wiring this and other modules in order to set up an
automation system, refer to Manual
Automation System S7-400, Hardware and Installation
.
This manual requires general knowledge of automation engineering.
Moreover, it is assumed that the readership has sufficient knowledge of computers or
equipment similar to a PC, such as programming devices, running under the Windows XP,
Windows Server or Windows 7 operating system. The PCS7 Readme includes information
on which operating system is suitable for your PCS7 configuration. The CPU 410-5H is
configured using the PCS 7 software, and you should thus be familiar in the handling of this
software.
In particular when operating a CPU 410-5H system in potentially explosive atmospheres, you
should always observe the information on the safety of electronic control systems provided in
the appendix of Manual
Automation System S7-400, Hardware and Installation
.
The manual is relevant to the following components:
● CPU 410–5H Process Automation; 6ES7 410-5HX08-0AB0 firmware version V8.0 and
higher
● CPU 410 SMART; 6ES7 410-5HN08-0AB0 as of firmware version V8.0
Note
CPU 410-5H and CPU 410 SMART
Except for the special features described in the section
Properties and technical
specifications of CPU 410 SMART
(Page 203), the CPU 410 SMART behaves like a CPU
-5H. Taking this section into consideration, the statements made in this manual about the
-5H also apply to the CPU 410 SMART.
To Next Page
Loading...
