Siemens CPU 410-5H Process Automation User Manual

Properties and technical specifications of CPU 410 SMART
15.2 Technical specifications of the CPU 410 SMART; (6ES7 410-5HN08-0AB0)
CPU 410-5H Process Automation/CPU 410 SMART
System Manual, 10/2013, A5E32631667-AA
205
15.2
Technical specifications of the CPU 410 SMART; (6ES7 410-
5HN08-0AB0)
6ES7410-5HN08-0AB0
Product type designation
CPU 410 SMART Process Automation
General information
Hardware product version
1
Firmware version
V8.0.1
Model
with Conformal Coating (ISA-S71.04 severity level G1; G2;
G3)
Engineering with
Programming package
as of PCS 7 V8.0 SP1 + HUP 247
CiR – Configuration in RUN
CiR synchronization time, base load
60 ms
CiR synchronization time, time per I/O slave
0 µs
Input current
From backplane bus 5 V DC, typ.
2.0 A
From backplane bus 5 V DC, max.
2.4 A
From backplane bus 24 V DC, max.
150 mA; DP interface
From interface 5 V DC, max.
90 mA at the DP Interface
Power loss
Power loss, typ.
10 W
Memory
Main memory
integrated
8 MB
Integrated (for program)
4 MB
Integrated (for data)
4 MB
Expandable
No
Load memory
Expandable FEPROM
No
Integrated RAM, max.
48 MB
Expandable RAM
No
Battery backup
Available
Yes
With battery
Yes; all data
Without battery
No
Battery
Backup battery
Battery operation
•
Backup battery current, typ.
370 µA; valid to 40 °C
•
Backup battery current, max.
2.1 mA

Siemens CPU 410-5H Process Automation Specifications

General

Brand	Siemens
Model	CPU 410-5H Process Automation
Category	Controller
Language	English