Preface
1.1 Preface
CPU 410-5H Process Automation/CPU 410 SMART
16 System Manual, 10/2013, A5E32631667-AA
For details on certifications and standards, refer to Manual
S7-400 Automation System,
Module Data
, section 1.1, Standards and Certifications. Here you will also find the technical
specification for the entire S7-400.
In addition to the manual, you will find detailed support on how to use the software in the
integrated online help system of the software.
The help system can be accessed using various interfaces:
● The
menu contains several commands:
opens the Help index. You will find
help on fault-tolerant systems in
Configuring fault-tolerant systems
.
●
provides detailed instructions on using the online help system.
● The context-sensitive help system provides information on the current context, for
example, on an open dialog or active window. You can call this help by clicking "Help" or
using the F1 key.
● The status bar provides a further form of context-sensitive help. It shows a short
description of each menu command when you position the mouse pointer over a
command.
● A short info text is also shown for the toolbar buttons when you hold the mouse pointer
briefly over a button.
If you prefer to read the information of the online help in printed form, you can print individual
topics, books or the entire help system.
The CPU 410-5H contains environmentally compatible materials and can be recycled. For
ecologically compatible recycling and disposal of your old device, contact a certificated
disposal service for electronic scrap.
If you have any questions relating to the products described in this manual, and do not find
the answers in this documentation, please contact your Siemens partner at our local offices.
You will find information on who to contact at:
Contact partners (http://www.siemens.com/automation/partner)
A guide to the technical documents for the various SIMATIC products and systems is
available at:
Documentation (http://www.automation.siemens.com/simatic/portal/html_76/techdoku.htm)
You can find the online catalog and order system under:
Catalog (http://mall.automation.siemens.com/)
To Next Page
Loading...
