Siemens CPU 410-5H Process Automation - Page 200

Technical data
14.1 Technical specifications of the CPU 410-5H; (6ES7 410-5HX08-0AB0)
CPU 410-5H Process Automation/CPU 410 SMART
200 System Manual, 10/2013, A5E32631667-AA
6ES7410-5HX08-0AB0
Local port numbers used by the system
0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532,
65533, 65534, 65535
Keep Alive function supported
Yes
3. Interface
Type of interface
integrated
Physics
RJ45 (only for service)
4. Interface
Type of interface
Plug-in synchronization module (FOC)
Plug
-in interface modules Synchronization module 6ES7960-1AA06-0XA0 or
6ES7960-1AB06-0XA0
5. Interface
Type of interface
Plug-in synchronization module (FOC)
Plug
-in interface modules Synchronization module 6ES7960-1AA06-0XA0 or
6ES7960-1AB06-0XA0
Protocols
PROFINET
IO Yes
PROFINET CBA
No
PROFIsafe
Yes
PROFIBUS
Yes
Protocols (Ethernet)
TCP/IP
Yes
Other protocols
AS-i
Yes; via add-on
MODBUS
Yes; via add-on
Foundation Fieldbus
Yes; via DP/FF link
Communication functions
PG/OP communication
Yes
•
Number of connectable OPs without message processing
119
•
Number of connectable OPs with message processing
119; when using Alarm_S/SQ and Alarm_D/DQ
Data record routing
Yes
S7 routing
Yes
S7 communication
Supported
Yes
As server
Yes
As client
Yes
User data per job, max.
64 KB
User data per job (consistent), max.
462 bytes; 1 variable
Open IE communication
TCP/IP
Yes; via integrated PROFINET interface and loadable FBs
•
Number of connections, max.
118
•
Data length, max.
32 KB
•
Several passive connections per port, supported
Yes