Siemens CPU 410-5H Process Automation - Page 229

Supplementary information
16.6 Communication services
CPU 410-5H Process Automation/CPU 410 SMART
System Manual, 10/2013, A5E32631667-AA
229
Figure 16-4 S7 routing: TeleService application example
Reference
● Further information on configuration with STEP 7 can be found in Manual Configuring
hardware and communication connections with STEP 7
(http://support.automation.siemens.com/WW/view/en/45531110).
● More basic information is available in Manual Communication with SIMATIC
(http://support.automation.siemens.com/WW/view/en/1254686).
● For more information about the TeleService adapter, refer to Manual TS Adapter
(http://support.automation.siemens.com/WW/view/en/20983182)
● For additional information about SFCs, refer to the Instructions list.
(http://support.automation.siemens.com/WW/view/en/44395684)
For a detailed description, refer to the STEP 7 online help or Manual System and
Standard Functions
(http://support.automation.siemens.com/WW/view/de/44240604/0/en).