What to do if Siemens HiPath 3000 displays 'Not possible' or 'Incorrect input'?
If your Siemens Telephone shows 'Not possible', 'Incorrect input', or 'Nothing stored', it indicates a problem such as an unavailable speed dial number, incorrectly entered appointment, blocked entry, unfulfilled prerequisite, or an incomplete number. You should correct your input, select a permitted option, or enter the phone number in full.
What does 'Time exceeded' mean on Siemens Telephone?
If your Siemens Telephone displays 'Time exceeded', it means the maximum input time was exceeded, or the On-hook key wasn't pressed. Avoid long pauses between keystrokes and press the On-hook key.
Why does my Siemens HiPath 3000 Telephone say 'Not available'?
If your Siemens Telephone shows 'Not available', it means the phone number wasn't fully entered, or the star/hash key wasn't pressed. Make sure to enter the phone number correctly or as prescribed.
What does 'Not allowed' mean on Siemens Handsets?
If your Siemens handset displays 'Not allowed,' it means an incorrect PIN was entered. Enter the correct PIN to proceed.
How to fix no display on Siemens Handsets?
If your Siemens handset screen is blank, it could be because the handset is not switched on or the batteries are empty. Press the On-hook key until you receive confirmation that the handset is on. If that doesn't work, charge or replace the batteries.
What to do if Siemens Handsets display 'Not allowed'?
If your Siemens handset displays 'Not allowed', it means an incorrect PIN was entered. Enter the correct PIN to proceed.
How to fix Siemens Handsets when there is no ringer?
If there is no ringer on your Siemens handset, the ringer might be deactivated. Activate the ringer.
Why can't I dial an external number on my Siemens Offroad Vehicle?
If you cannot dial an external number on your Siemens Offroad Vehicle, it is likely that the handset is locked. You should unlock the handset.
Why is there no sound during calls on my Siemens Cell Phone?
If you can't hear anything during a call on your Siemens Cell Phone, it's possible that the microphone and receiver inset are muted. This happens when the left side of the control key is pressed. To fix this, press the 'Go Back' display key to reactivate the microphone and the receiver inset.
How to fix a Siemens Cell Phone with no display?
If your Siemens Cell Phone is not displaying anything, it could be due to two main reasons: the phone is not switched on or the battery is empty. To solve this, press the on-hook key until you hear a confirmation tone. If that doesn't work, charge or replace the battery.
General| Protocols | SIP |
|---|---|
| Connectivity | Analog, ISDN, IP |
| Features | Call forwarding, conference calling, call waiting, auto attendant |
| Ports | Varies depending on the model and configuration; Includes ports for IP phones, analog phones, ISDN lines, and network connections |
| Voicemail | Integrated voicemail system |
| Networking | IP networking |
| Power Supply | 100-240V AC |
| Dimensions (Base Unit) | Varies depending on the model (e.g., 440 x 300 x 80 mm) |
| Weight | Varies by configuration |
Guidelines for using Ex-certified handsets in explosive environments, covering device integrity and user precautions.
Rules for using approved battery packs and charging procedures in Ex zones.
General safety advice for using handsets, including hearing protection and interference.
Requirements for BGR-compliant operation, including alarm server interaction and user awareness.
Details on personal alarm functions for M3 Plus and M3 Ex Plus, including manual and automatic alarms.
Verifying all components are present and preparing the handset for first use.
Step-by-step instructions for opening the compartment and inserting the battery pack.
Details on charging the battery, status indicators, and initial charging requirements.
Explanation of how the control key operates in different modes and contexts.
Procedures for making calls using 'seize line first' and 'dial first' methods.
Setting up call forwarding to redirect incoming calls to another number.
How to dial predefined system speed dialling numbers using codes.
Steps for adding, modifying, and deleting contacts in the handset's phonebook.
Placing calls on hold, switching between calls, and initiating conferences.
How to set and manage a PIN code to lock the handset against unauthorized access.
Procedures for manually locking/unlocking the handset and central lock management.
Understanding alarm statuses, key terms, and operating modes of the personal alarm system.
How sensors detect alarms, use of the alarm key, and signal types.
Categorization and explanation of different types of personal alarms.
Steps to activate and disable the monitoring mode for the personal alarm system.
How to respond to prealarms and technical warnings to prevent false alarms.
Procedures for sending emergency alarms manually or automatically.
Performing tests to ensure all components of the alarm system function correctly.
A guide to diagnosing and resolving typical handset malfunctions.
To Next Page