Why does my Siemens HiPath 3000 Telephone say 'Not available'?
If your Siemens Telephone shows 'Not available', it means the phone number wasn't fully entered, or the star/hash key wasn't pressed. Make sure to enter the phone number correctly or as prescribed.
What to do if Siemens Handsets display 'Re-enter code'?
If the Siemens handset displays 'Re-enter code', it means the communication system is overloaded. Please wait and try again later.
What to do if Siemens HiPath 3000 displays 'Not possible' or 'Incorrect input'?
If your Siemens Telephone shows 'Not possible', 'Incorrect input', or 'Nothing stored', it indicates a problem such as an unavailable speed dial number, incorrectly entered appointment, blocked entry, unfulfilled prerequisite, or an incomplete number. You should correct your input, select a permitted option, or enter the phone number in full.
Why does my Siemens Telephone say 'Do not disturb'?
If your Siemens Telephone displays 'Do not disturb', it means that data transfer is active. Wait and try again later.
How to fix no display on Siemens Offroad Vehicle?
If there is no display on your Siemens Offroad Vehicle, the handset might not be switched on, or the batteries may be empty. Press the On-hook key until confirmation is received. If that doesn't work, charge or replace the batteries.
What to do if Siemens Offroad Vehicle shows 'Currently not available'?
If your Siemens Offroad Vehicle displays 'Currently not available', it indicates that the function is not available or there is no connection for the dialed number. Wait and try again later. If the issue persists, ensure you've entered the phone number correctly or call the attendant console.
How to fix Siemens Handsets when there is no display?
If your Siemens handset has no display, it could be that the handset isn't switched on or the battery is flat. Press the On-hook key until you receive confirmation. Charge or replace the battery.
Why does Siemens Handsets line Base n flash?
If the line "Base n" flashes on your Siemens handset (where n= 1 - 4), it indicates that the handset is either out of the base radio range or the radio signals are too weak, the handset isn't registered, or the intervals between synchronization attempts are too long. Try moving closer to the base radio range or changing your position. If that doesn't work, register the handset. As another option, switch the handset off and then back on.
What does 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible' mean on Siemens HiPath 3000 Telephone?
If your Siemens Telephone displays 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible', it means that the handset is blocked. To resolve this, remove the battery pack from the handset and then re-insert it, proceeding as if you were loading batteries for the first time.
How to fix no display on Siemens HiPath 3000 Telephone?
If your Siemens Telephone has no display, it could be because the handset isn't switched on or the battery pack is flat. Press the On-hook key until you receive confirmation, and charge or replace the battery pack.
General| Protocols | SIP |
|---|---|
| Connectivity | Analog, ISDN, IP |
| Features | Call forwarding, conference calling, call waiting, auto attendant |
| Ports | Varies depending on the model and configuration; Includes ports for IP phones, analog phones, ISDN lines, and network connections |
| Voicemail | Integrated voicemail system |
| Networking | IP networking |
| Power Supply | 100-240V AC |
| Dimensions (Base Unit) | Varies depending on the model (e.g., 440 x 300 x 80 mm) |
| Weight | Varies by configuration |
Guidelines for using Ex-certified handsets in explosive environments, covering device integrity and user precautions.
Rules for using approved battery packs and charging procedures in Ex zones.
General safety advice for using handsets, including hearing protection and interference.
Requirements for BGR-compliant operation, including alarm server interaction and user awareness.
Details on personal alarm functions for M3 Plus and M3 Ex Plus, including manual and automatic alarms.
Verifying all components are present and preparing the handset for first use.
Step-by-step instructions for opening the compartment and inserting the battery pack.
Details on charging the battery, status indicators, and initial charging requirements.
Explanation of how the control key operates in different modes and contexts.
Procedures for making calls using 'seize line first' and 'dial first' methods.
Setting up call forwarding to redirect incoming calls to another number.
How to dial predefined system speed dialling numbers using codes.
Steps for adding, modifying, and deleting contacts in the handset's phonebook.
Placing calls on hold, switching between calls, and initiating conferences.
How to set and manage a PIN code to lock the handset against unauthorized access.
Procedures for manually locking/unlocking the handset and central lock management.
Understanding alarm statuses, key terms, and operating modes of the personal alarm system.
How sensors detect alarms, use of the alarm key, and signal types.
Categorization and explanation of different types of personal alarms.
Steps to activate and disable the monitoring mode for the personal alarm system.
How to respond to prealarms and technical warnings to prevent false alarms.
Procedures for sending emergency alarms manually or automatically.
Performing tests to ensure all components of the alarm system function correctly.
A guide to diagnosing and resolving typical handset malfunctions.
To Next Page