Siemens SCALANCE X-200

Menus in the WBM
5.4 The Switch menu
SCALANCE X-200
134 Configuration Manual, 03/2015, C79000-G8976-C285-06
Syntax of the Command Line Interface
Table 5- 34 Switch Forwarding Database - CLI\SWITCH\FDB>
Command
Description
Comment
info
Shows the current switch forwarding database.
add <MAC addr><port> Adds a static MAC address.
If you enter a multicast address statically, you can
specify several ports. Separate the ports with
commas.
Example:
The command "add 01-08-00-99-99-99 1,2,3"
enters the MAC address 01-08-00-99-99-99 for
ports 1, 2 and 3 in the FDB.
Administrator only
delete [<MAC addr>|D|S|B] Deletes an entry:
• <MAC addr>
Deletes the entry for a MAC address.
• D
Deletes all dynamic entries.
• S
Deletes all static entries.
• B
Deletes all dynamic and static entries.
Administrator only
Note
With SCALANCE X
-200, the MAC address table is deleted within 1s.
Note
SCALANCE X
-200IRT IE switches can learn up to 4000 Ethernet addresses, the other
SCALANCE X
-200 IE switches up to 8000 Ethernet addresses. The entry of a learned
Ethernet address in the address table is made by the storage system which may reduce the
actual number of addresses that can be learned.