Siemens SCALANCE X-200

Menus in the WBM
5.1 The System menu
SCALANCE X-200
56 Configuration Manual, 03/2015, C79000-G8976-C285-06
Firmware version
IE switch
at least X-200 V4.3
X204-2TS
at least X-200 V4.1 XF204
XF204-2
XF206-1
XF208
SSL Private Key File
Name of the file that contains the private key for SSL.
SSL Certificate File
Name of the file that contains the certificate for SSL
Note
The private key
and the certificate for SSL are required to allow the user to communicate via
a secure connection with the Web server on the IE Switch X
-200.
The files must be available in PEM format.
System Command Line Interface
Table 5- 4 System Save & Load TFTP - CLI\SYSTEM\LOADSAVE>
Command
Description
Comment
info
Displays information on the system.
server [IP address] [:port] Specifies the IP address or the port of the TFTP
server with which data will be exchanged.
Administrator only
fwname
Specifies the name of the firmware file.
Administrator only
fwload
Loads the firmware from a file.
Administrator only
fwsave
Saves the firmware in a file.
Administrator only
cfgname [file name] Specifies the name of a file (maximum 255 charac-
ters) from which the configuration data will be
loaded or in which this data will be saved.
Administrator only
cfgsave
Saves the configuration data in a file.
Administrator only
cfgload
Loads the configuration data from a file.
Administrator only
logname [file name] Specifies the name of a file (maximum 255 charac-
ters) in which the log table is stored.
Administrator only
logsave
Saves the log table in a file.
pkname Specifies the name of the file (maximum 255 char-
acters) that contains the private SSL key.
Administrator only
pkload
Loads the private SSL key from a file.
Administrator only.
ctname Specifies the name of the file (maximum 255 char-
acters) that contains the SSL certificate.
Administrator only
ctload
Loads the SSL certificate from a file.
Administrator only