EasyManuals Logo

Siemens SIMATIC HMI series System Manual

Siemens SIMATIC HMI series
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
3.10 Extended functionality with options for Process Control
Improved message filter in the acoustic alarm
As of WinCC V7.4, you can specify the user text blocks as filter for triggering the signal in
addition to the message class and the message priority.
By
default,
the first three user text blocks of a message are available with the following default
setting:
WinCC project:
Message text
Point of error
Block: 3
PCS 7 project:
Source
Area
Event
You can optionally use the other user text blocks.
You can configure the filters for each user text block dependent on the language or language-
neutral.
Cancellation filter
To negate a filter, use the following prefix:
!
The corresponding tag is then only triggered of the filter with this prefix is not applicable.
Extended redundancy monitoring in the area overview
Status of the redundancy synchronization
The redundancy monitoring points to a redundancy synchronization that is running:
Arrow symbols signal that a redundancy server pair is currently performing a synchronization.
SIMATIC Process Historian-Server
When you use the SIMATIC Process Historian, the status of the Process Historian system is
checked as well.
For the status monitoring of master (principal) and standby (mirror), WinCC uses the following
system tags:
@PHServer_Principal_State
@PHServer_Principal_Details
@PHServer_Mirror_State
@PHServer_Mirror_Details
What's new in WinCC V7?
3.10 Extended functionality with options for Process Control
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA 105

Table of Contents

Other manuals for Siemens SIMATIC HMI series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC HMI series and is the answer not in the manual?

Siemens SIMATIC HMI series Specifications

General IconGeneral
SeriesSIMATIC HMI
CategoryControl Panel
Display TypeTFT LCD
Touch ScreenYes (resistive or capacitive, depending on model)
ProcessorVaries by model (e.g., ARM-based processors)
StorageVaries by model (e.g., Flash memory, microSD card slot)
Communication InterfacesEthernet, USB
Protection ClassIP65 (front panel), depending on model
Operating Temperature0 to 50°C, -20 to 60°C
Power Supply24 V DC
Memory128 MB, 256 MB

Related product manuals