Procedure
1. In the Windows Start menu, enter the following command line in the "Run" field:
– <Path for the installation data>\setup.exe /record
Select
the DVD drive or a central PC to which the installation data were copied as path for
the installation files.
Setup is started.
2. Select the desired language and click "OK".
The "Record function" dialog is displayed.
3. Activate the Record function.
4. Select the path in which you want to create the "Ra_Auto.ini" control file and confirm with
"Next".
5. Select the required components and settings for the installation.
Once you have made the settings, the message "Recording completed" is displayed.
Result
The control file "Ra_Auto.ini" is created and saved in the selected path.
The same setup version must be used for central installation and for creation of the
"Ra_Auto.ini" file.
1.7.6.3 Start central installation
For central installation on the PC of your WinCC system, start an automatic installation.
The settings of the "Ra_Auto.ini" control file are applied in the process.
Requirement
● You have created the "Ra_Auto.ini" file using the Record function.
The file "Ra_Auto.ini" must be created with the existing setup version.
● The same operating system version is installed on the PC.
Procedure
1. If required, copy the setup to a central server or PC.
2. Copy the file "Ra_Auto.ini" to the folder "C:\Windows" on the PC to be installed.
WinCC Installation Notes
1.7 Installing WinCC
WinCC: General information and installation
44 System Manual, 02/2017, A5E40840020-AA
To Next Page
Loading...
Need help?
General
