Siemens SIMATIC HMI series System Manual

4.2 Customer support
Customer Support and Technical Support
You
can
reach the SIMATIC hotlines at the times specified in the following table. The SIMATIC
hotline employees speak German and English. The Authorization hotline offers French, Italian
or Spanish customer support in addition to German and English.
Technical support
Nuremberg (GMT +1:00)
Service HoursMonday - Friday, 8:00 to 17:00 (CET/CEST)
Phone +49 (0)911 895 7222
Fax +49 (0)911 895 7223
E-mail https://support.industry.siemens.com/My/ww/en/requests (
https://
support.industry.siemens.com/My/ww/en/requests)
An overview of the Technical Support is available at the following URL:
● https://support.industry.siemens.com/cs/ww/en/sc/2090 (https://
support.industry.siemens.com/cs/ww/en/sc/2090)
Automation Value Card (AVC)
The Automation Value Card (AVC) provides extended Technical Support and is available 24
hours every day of the week. Information on the AVC can be found at the following URL:
● https://support.industry.siemens.com/cs/ww/en/sc/2021 (https://
support.industry.siemens.com/cs/ww/en/sc/2021)
SIMATIC Customer Online Support
Service and Support
An overview of the support offering for our products is available at the following URL:
● https://support.industry.siemens.com/ (https://support.industry.siemens.com/cs/ww/en/)
In Product Support, for example, you will find downloads of firmware updates, service packs
and useful utilities.
Online Help is available so that you can successfully use the Support offering. Open the Online
Help by selecting the corresponding button on the Internet site or at the following URL:
● https://support.industry.siemens.com/cs/helpcenter/en/index.htm (https://
support.industry.siemens.com/cs/helpcenter/en/index.htm)
The app is available for mobile Siemens Support:
● https://support.industry.siemens.com/cs/sc/2067 (https://support.industry.siemens.com/
cs/ww/en/sc/2067)
Service and Support
4.2 Customer support
WinCC: General information and installation
118 System Manual, 02/2017, A5E40840020-AA

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB