Siemens SIMATIC HMI series System Manual

See also
WinCC Documentation (Page 123
)
Tooltips and Status Bar (Page 123)
Direct Help ("What's This?") in WinCC (Page 124)
WinCC Information System (Page 126)
Navigation in the WinCC Information System (Page 128)
4.4.7 Documentation in the Internet
Overview
You can search for WinCC documentation in the Internet. The search results will be displayed
in "My Documentation Manager". There, you compile your own documents which you can then
output in the formats PDF, RTF or XML.
Searching for WinCC Help topics in the Internet
1. Click support.automation.siemens.com (
http://support.automation.siemens.com/WW/view/
en/10805583/133000) to search in the WinCC documentation.
2. Select "Manuals/Operating Instructions" as the entry type in the filter settings.
3.
Go to the "WinCC Information System Online Help" documentation and click on one of the
desired manuals, such as "WinCC: Working with WinCC".
4. Click on the link "Displaying and configuring" in the open page. The page "My
Documentation Manager" opens and the topics of the manual will be displayed.
Direct call of "My Documentation Manager"
If you have already displayed or compiled documents in "My Documentation Manager", use
support.automation.siemens.com (
http://support.automation.siemens.com/WW/view/en/
10805583/133000) to open "My Documentation Manager". Click on the link "My
Documentation Manager" in the link box "mySupport" on the right. On the start page you will
find a detailed description of the functions and operation of "My Documentation Manager".
If you want to use all the functions without any restrictions, you have to register for "My
Documentation Manager". The registration link can be found at the top right in "My
Documentation Manager".
After registration, you can download the PDF version of the manual
via "My Library".
Service and Support
4.4 Help on WinCC Documentation
WinCC: General information and installation
132 System Manual, 02/2017, A5E40840020-AA

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB