Siemens SIMATIC HMI series System Manual

7.8 Restore license key
Introduction
A license key is defective if:
●
The license on the hard disk can no longer be accessed.
●
The key can no longer be found during the transfer to the license data storage medium.
Restore
The license key can be restored through the "Support for License Management".
To contact your local agent for "Automation & Drives", search our contact database on the
Internet under:
● http://www.automation.siemens.com/partner/index.asp (
http://
www.automation.siemens.com/partner/index.asp)
Required information
If you contact "Support for License Management", have the following information ready:
● Company data (Name, Address, Country, Telephone/Fax...)
●
Numerical inquiry code
● With regard to the license data storage medium:
– Article number of the product (e.g. "6AV...")
– Product designation in plain text
– Serial number (license number).
You can find this information on the "Certificate of License" (CoL).
See also
Basic license types and license types in WinCC (Page 198)
Internet: Contact person database (
http://www.automation.siemens.com/partner/index.asp)
Licensing
7.8 Restore license key
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA 207

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB