Proper use
Note the following:
WARNING
Proper use of Siemens products
Siemens products may only be used for the applications described in the catalog and in the
relevant technical
documentation. If products and components from other manufacturers are
used, these must be recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are required to ensure
that the products operate safely and without any problems. The permissible ambient
conditions must be adhered to. The information in the relevant documentation must be
observed.
Trademarks
All names
identified by ® are registered trademarks of Siemens AG. The remaining names in
this publication may be trademarks whose use by third parties for their own purposes could
violate the rights of the owner.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions only form one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Systems, machines and components should only be connected to
the enterprise network or the Internet if necessary and only to the extent necessary and with
appropriate protective measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens’ guidance on appropriate security measures should be taken into
account. For more information about industrial security, please visit
● http://www.siemens.com/industrialsecurity (
http://www.siemens.com/industrialsecurity)
Siemens’ products
and solutions undergo continuous development to make them more secure.
Siemens strongly recommends applying product updates as soon as they are available and
always using the latest product versions. Using versions that are obsolete or are no longer
supported can increase the risk of cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
● http://www.siemens.com/industrialsecurity (
http://www.siemens.com/industrialsecurity)
Service and Support
4.1 Warnings
WinCC: General information and installation
116 System Manual, 02/2017, A5E40840020-AA
To Next Page
Loading...
Need help?
General
