Siemens SIMATIC HMI series System Manual

Transferring the licenses
1. Connect the WinCC license data storage medium with the computer.
2.
Open the Automation License Manager in the "Siemens Automation" program group.
3. Select the drive in the navigation window. The WinCC licenses on the license data storage
medium are displayed.
4. Select a license from the table. You can select more than one license for transfer.
5. In the shortcut menu of the license select the entry "Transfer.." or drag and drop the
licenses. The "Transfer License Key" dialog opens.
6. Select the destination drive and confirm your selection with "OK".
7. The desired license is transferred and written to the destination drive.
8. If necessary, repeat the transfer of licenses from other license data storage media.
Removing the licenses
1. Connect the WinCC license data storage medium with the computer.
2. Open the Automation License Manager in the "Siemens Automation" program group.
3. In the navigation window, select the drive where the license to be deleted is located. The
WinCC licenses on the drive are displayed.
4. Select the required license in the table. You can also select multiple licenses for removing.
5. In the shortcut menu of this license select the entry "Transfer.." or drag and drop the
licenses. The "Transfer License Key" dialog opens.
6. Select the license data storage medium as the destination drive and confirm your selection
with "OK".
7. The desired license is transferred and written to the destination drive.
See also
How to Upgrade Licenses (Page 204)
Licensing
7.5 How to manage licenses
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA 203

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB