Safety instructions
2.3 Notes on mounting
SIMATIC IPC PX-39A PRO
30 Operating Instructions, 11/2022, A5E51699950-AA
2.3 Notes on mounting
You can find important information on this in the detailed description of the device
installation, see "Mounting the device (Page 41)".
2.4 Notes on ambient and environmental conditions
Ambient and environmental conditions
Ambient conditions and chemical resistance
Unsuitable ambient conditions can cause faults or damage the device.
Failure to comply nullifies the warranty in accordance with IEC/UL/EN/DIN-EN 61010-2-201.
• Operate the device only in closed rooms.
• Only operate the device in the ambient conditions specified in the technical
specifications.
• Observe the permitted mounting positions of the device.
• Please note that when the device is operated in severe environments which are subject
to caustic vapors or gases, the provision of clean air is ensured.
• Clean the enclosure surface with a damp cloth and make sure that no water enters the
When you plan your project, you should make allowances for:
• The climatic and mechanical environmental conditions specified in the operating
instructions.
• Do not operate the device in severe operating conditions which are subject to caustic
vapors or gases.
• For installation in a cabinet, observe the SIMATIC setup guidelines as well as the relevant
DIN/VDE requirements or the applicable country-specific regulations.
To Next Page
Loading...
