Siemens SIMATIC TIM 3V-IE DNP3

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
286 System Manual, 12/2015, C79000-G8976-C253-04
Event ID
(hex)
Detailed
event
(hex)
Meaning
F560
032C
Internal / external WAN interface: STA number not found in telephone number list.
F360 032D Entering state: Internal / external WAN interface: Permanent connection established to a
subscriber.
F260 Exiting state: Internal / external WAN interface: Permanent connection to a subscriber was
terminated.
F360 032E Entering state: Internal / external WAN interface: Permanent connection to a subscriber was
registered.
F260 Exiting state: Internal / external WAN interface: Permanent connection to a subscriber was
deregistered.
F560
032F
Internal / external WAN interface: Permanent connection to a subscriber was aborted.
F360
0330
Entering state: Internal / external WAN interface: Incoming call disabled.
F260
Exiting state: Internal / external WAN interface: Incoming call enabled.
F360
0331
Internal / external WAN interface: Establishing connection to a subscriber.
F360
0332
Internal / external WAN interface: Connection to a subscriber established (outgoing call).
F360 0333 Internal / external WAN interface: Connection to a subscriber established (incoming call; sub-
scriber number not yet identified).
F360
0334
Internal / external WAN interface: Connection to a subscriber was terminated.
F560
0335
Internal / external WAN interface: Connection to a subscriber was aborted.
F360
0336
Internal / external WAN interface: Connection to a subscriber is already terminated.
F360
0337
Internal / external WAN interface: Supervision time exceeded. No repetition.
F360
0338
Internal / external WAN interface: Send buffer was deleted.
F360 0339 Internal / external WAN interface: Image memory and send buffer were deleted.
F360
033A
Internal / external WAN interface: No telephone number in modem memory.
F960
033B
Internal / external WAN interface: PDU received with unknown STA number.
F360 033C Entering state: Internal / external WAN interface: Driver redundancy - memory management
switched over.
F260 Exiting state: Internal / external WAN interface: Driver redundancy - memory management
switched back.
F560
033D
Internal / external WAN interface: Incorrect service request to pager (SMS).
F360
033E
Internal / external WAN interface: No entries in the send queue.
F560
033F
Internal / external WAN interface: Unknown message type.
F560
0340
Internal / external WAN interface: Communication with WAN driver disrupted.
F360
0341
Internal / external WAN interface: Incoming call (RING).
F960
0342
Internal / external WAN interface: No connection with incoming call.
F960
0343
Internal / external WAN interface: Call or connection abort.
F960
0344
Internal / external WAN interface: No carrier frequency detected on partner.
F360 0345 Entering state: Internal / external WAN interface: Further dialing attempts were made in the
background to a disturbed subscriber.
F260 Exiting state: Internal / external WAN interface: Subs
criber is available again. Dialing attempts
in the background will be stopped.
F960
0346
Internal / external WAN interface: Incorrect PIN number transferred to GSM module.
F960
0348
Internal / external WAN interface: Error occurred in GSM module.
F960
0349
Internal / external WAN interface: GSM module not responding or not available.