Approvals
TIM DNP3
310 System Manual, 12/2015, C79000-G8976-C253-04
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4
Ta: Refer to the temperature information on the type plate of the device
The device meets the requirements of the AS/NZS 2064 standards (Class A).
Marking for the customs union
EAC (Eurasian Conformity)
Customs union of Russia, Belarus and Kazakhstan
Declaration of the conformity according to the technical regulations of the customs union
(TR CU)
MSIP 요구사항 - For Korea only
Certification Number: MSIP-REM-S49-S7400CP
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정 외의 지역에서 사용하는것을 목적으로 합니다.
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
If you require a list of the current approvals for individual devices, consult your Siemens
contact or check the Internet pages of Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15937/cert)
Overview of the approvals for SIMATIC NET products
You will find an overview of the approvals for SIMATIC NET products including approvals for
shipbuilding on the Internet pages of Siemens Industry Online Support under the following
address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/57337426)
To Next Page
Loading...
Need help?
General
