Siemens SIMOCODE pro User Manual

Description of the blocks
4.3 MMOprtn block
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
105
CtrlFunc parameter
The CtrlFunc parameter contains the value of the configured control function of SIMOCODE,
e.g. direct starter.
Table 4- 14 Assignment
Bit
Control function
0
Overload relay
1 Direct starter
2
Reversing starter
3
Linked device (MCCB)
4
Star-delta starter
5
Star-delta reversing starter
6
Dahlander
7
Dahlander reversing starter
8
Pole-changing starter
9
Pole-changing reversing starter
10
Valve
11
Positioner 1
12
Positioner 2
13
Positioner 3
14
Positioner 4
15
Positioner 5
16
Soft starter
17
Soft reversing starter

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000