Description of the blocks
4.5 Block for statistical function MMStat
SIMOCODE pro PCS 7 Library V9.0
182 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Note
The following parameters are enabled for SIMOCODE pro
C (BU1) and S (BU0):
Timer 1 and 2
Counter 1 and 2
No calculation module
The following parameters are enabled for SIMOCODE pro V (BU2):
Timer 1 to 4
Counter 1 to 4
Calculation module output 1 and 2
The following parameters are enabled for SIMOCODE pro V PN
(BU3):
Timer 1 to 6
Counter 1 to 6
Calculation module output 1 to 4.
To Next Page
Loading...
