Siemens SIMOCODE pro User Manual

Parameter
A.5 Block parameter MMStat
SIMOCODE pro PCS 7 Library V9.0
266 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Output parameters for SIMOCODE pro PROFINET devices
Table A- 18 Output parameters MMStat – PROFINET devices
Parameter
Data format
Default setting
Meaning
Tmr5Act STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Tmr5Act Actual Value in sec
Tmr6Act STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Tmr6Act Actual Value in sec
Cnt5Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter5 Actual Value
Cnt6Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter6 Actual Value
CalMod3Out STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Calculation module 3 – Output
CalMod4Out STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Calculation module 4 – Output
AnaMulOut STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Analog Multiplexer – Output

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000