5
05.01
5.1 Closed–loop control with digital setpoint interface
5-104
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
The digital drive controls can be used with the following software releases of the
SIEMENS drive components:
Table 5-2 Software functions
High Performance High Standard
MLFB 6SN1118–0DJ2V–0AAV
6SN1118–0DK2V–0AAV
6SN1118–0DM3V–0AAV
NCU version w6.4.9 w6.4.9
drive version w6.3.11 w6.5.4
PCU50/PCU20 w6.2.18 w6.2.18
Commissioning tool for the
PC
w6.2.18 w6.2.18
NCU hardware w573.3; w 572.3; 571.3 w573.3; w572.3; 571.3
Mixed operation, FD/MSD w6.2.12 w6.2.12
Software versions
5 Control Units 05.08
To Next Page
Loading...
