6
05.01
6.3 Technical data
6-160
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
Table 6-4 Technical data, UI modules
Heat dissipation
Heat dissipation
Hose cooling
6SN11 45-
6SN11 46-
6SN11 45-
–
1AB00–0BAV (INT./
EXT.)
–
1AA01–0AAV (INT./
EXT.)
–
–
1AA00–0CAV (INT.)
1AB00–0CAV (EXT.)
–
Infeed/regenerative feed-
back
Rated power (S1)
S6 power
Peak power (400 V)
kW
kW
kW
5
6.5
10
10
13
25
28
36
50
Power reduction for undervoltage (calculated)
Rated power at 323 V
S6 power at 323 V
Peak power (323 V)
kW
kW
kW
4.5
6.0
9.0
9
12
22
25
32
45
Input currents (AC
RMS
) Use for dimensioning the installation, not for calculating the power!
Rated current (400 V) 12 24 68
Built–in pulsed resistor
Continuous/peak power kW 0.2/10 0.3/25 –
Energy consumption,
max:
kWs E = 13.5 E = 7.5 –
Connection data
Voltage (power) V refer to Chapter 6.3.1, Table 6-5
Voltage (electronics) V refer to Chapter 6.3.1, Table 6-5
Power supply V At DC link with 600/625/680 V DC or parallel infeed, AC and DC connection
Frequency Hz 50 to 60 10%
Connection cross–sec-
tion, max.
mm
2
6 16 50
Output voltage V 0...490...680 depending on the line supply voltage
Output frequency Hz 0...1400 depending on the control unit
Module width mm 50 100 200
Type of cooling
Internal cooling Non–ventilated Universal cooling Internal separately–
External cooling
Hose cooling
Non–ventilated
–
internal/external
–
driven fan
Integrated third–party
fan (volumetric flow,
both 42 m
3
/hr)
Losses
Internal cooling
External cooling
Hose cooling
W
W (int./
ext.)
W (int./
ext.)
270
270/–
–
450
120/330
–
250
90/160
–
Efficiency η 0.98 0.98 0.98
Weight
Internal cooling
External cooling
Hose cooling
kg
kg
kg
6.5
6.5
–
9.5
9.5
–
15.5
15.5
–
Note
Temperature derating, see Chapter 4.4.2.
Installation altitude derating, see Chapter 4.4.3.
6 Infeed Modules 11.0505.08
To Next Page
Loading...
