7
05.01
7.3 Line supply fuses, transformers and main switch
7-214
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
Table 7-7 Autotransformer for a 220 V input voltage
I/RF module
16/21 kW
I/RF module
36/47 kW
I/RF module
55/71 kW
I/RF module
80/104 kW
I/RF module
120/156 kW
Nominal power rating [kVA]
Autotransf. IP00/IP20
Autotransformer IP23
21
18.9
46.5
42
70.3
63.3
104
93.5
155
140
Input voltage [V] 3–ph. 220 V AC 10%; 50 Hz – 10% to 60 Hz + 10%
Output voltage [V] 3–ph. 400 V AC
Vector group Yna0
Neutral point N can be loaded only with maximum 10% if not corrected with an N (=
MP) line supply!
Permiss. ambient temperature
Operation [C]
Storage/transport [C]
–25 to +40, for power derating up to +55 C
–25 to +80
Humidity classification in ac-
cordance with
DIN EN 60721–3–3
Class 3K5 condensation and formation of ice excluded
Degree of protection acc. to
DIN EN 60529 (IEC 60529)
IP00/IP20/IP23
Degree of protection IP 00: ––> Order No. 0
Degree of protection IP 20: ––> Order No. 8
Degree of protection IP 23: ––> Order No. 2
2)
Order No. according to
Catalog PD10
IP00:
4AU3696–
0ER30–2XA0
IP23:
4AU3696–
0ER30–2XC0
4BU4395–
0CB6–8B
4BU4595–
0BD0–8B
4BU5295–
0AE4–8B
4BU5495–
1AA1–8B
Power loss [W]
Autotransf. IP00/IP20
Autotransformer IP23
550
1)
460
900
1)
760
980
1)
830
1350
1)
1150
1650
1400
Short–circuit voltage uk [%] 3
Conn. cross–section, max.
primary/secondary side
16/16 mm
2
70/50 mm
2
95/70 mm
2
Flat termination
3)
Fuse, primary side 63 A gL 160 A gL 224 A gL 300 A gL 500 A gL
Weight [kg], approx. for
Degree of prot. IP 00
Degree of prot. IP 20/23
57
75
110
130
155
175
215
275
310
370
Terminal arrangement 1U1 to 1W1 = 220 V input, 2U1 to 2W1 = 400 V output, N = neutral point
Dim. (L x W x H) approx.[mm]
Autotransf. IP00/IP20
Autotransformer IP23
370x220x330
460x465x555
480x230x430
565x290x520
480x300x430
565x460x520
530x290x520
900x600x720
590x320x585
900x600x720
7 Line Su
l
Connection 05.08
To Next Page
Loading...
