7
05.01
7.4 Line filters for I/R and UI modules
7-226
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) -- 05/2008 Edition
Table 7-13 Assigning wideband line filters to the UI modules
UI module
5/10 kW
UI module
10/25 kW
UI module
28/50 kW
Filter components Line filter, 5 kW Line filter , 10 kW Line filter , 36 kW
Rated AC current 16 A 25 A 65 A
Order number 6SN1111-- 0AA01--1BAV
3)
6SN1111-- 0AA01--1AAV
3)
6SN1111-- 0AA01--1CAV
3)
Supply voltage 3--ph. 380 V -- 10% ... 3--ph. 480 V AC + 10% (TN line supply)
1)
; 50...60 Hz ±10%
Mounting position Arbitrary (only for UI modules)
Dimensions (W x H x D),
approx.
156 x 193 x 81 156 x 281 x 91 171 x 261 x 141
Module width Refer to dimension drawings, Chapter 12
Weight, filter 3.8 kg 5.7 kg 12.5 kg
Power loss 20 W 20 W 25 W
Connection 4mm
2
/1.5 Nm
PE, M6 studs/3 Nm
10 mm
2
/1.5 Nm
PE, M6 studs/3 Nm
50 mm
2
/6 Nm
PE, M10 studs
Terminals
Line supply connection
(line)
L1, L2, L3, PE L1, L2, L3, PE L1, L2, L3, PE
Terminals
Load connection (load)
U, V, W U, V, W U, V, W
I
rated
fuse
2)
16 A 25 A 80 A
Permissible
ambient temperature
S Operation [°C]
S Storage/transport [°C]
0 ... +40; maximum +55 at 0.6 • P
rated
of the UI module
--25 ... +70
Cooler Natural ventilation
Degree of protection to EN
60529 (IEC 60529)
IP20
EN 5501 1 radio interference
suppression
Limit value Class A for cable--borne interference if systems are engineered according to
the Configuration Manual
Limit value Class B for cable--borne faults and disturbances on request
1) The permissible supply voltage of the system depends on the infeed module used.
2) The fuse used must have this rated current. Recommendations for the fuses, refer to Table 7-4.
3) Last position of the Order No. ≥1
7L
ne Su
l
Connec
on 05.08
To Next Page
Loading...
