7
05.01
7.4 Line filters for I/R and UI modules
7-228
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
L1 L2 L3
Load connection
Warning and connection label
Rating plate
Protective conductor
Line supply connection
Mounting
position
(preferred
position)
Note:
If the line supply and load connections are interchanged, this will immediately damage the components!
Any mounting position, base mounting is possible. However, cooling must be guaranteed and it is not
permissible to interchange the line supply and load connection!
100 mm
Cooling clearance
100 mm
Cooling clearance
Fig. 7-13 Basic line filter for I/R module (example 36 kW)
Interfaces
7 Line Su
l
Connection 02.07
To Next Page
Loading...
